Friday, April 11, 2008

Enterprise Routers

All sizes of routers may be found inside enterprises. While the most powerful routers tend to be found in ISPs, academic and research facilities, as well as large businesses, may need large routers.
A three-layer model is in common use, not all of which need be present in smaller networks .

Access

Access routers, including SOHO, are located at customer sites such as branch offices that do not need hierarchical routing of their own. Typically, they are optimized for low cost.

Distribution

Distribution routers aggregate traffic from multiple access routers, either at the same site, or to collect the data streams from multiple sites to a major enterprise location. Distribution routers often are responsible for enforcing quality of service across a WAN, so they may have considerable memory, multiple WAN interfaces, and substantial processing intelligence.
They may also provide connectivity to groups of servers or to external networks. In the latter application, the router's functionality must be carefully considered as part of the overall security architecture. Separate from the router may be a Firewall or VPN concentrator, or the router may include these and other security functions.
When an enterprise is primarily on one campus, there may not be a distinct distribution tier, other than perhaps off-campus access. In such cases, the access routers, connected to LANs, interconnect via core routers.

Core
In enterprises, core router may provide a "collapsed backbone" interconnecting the distribution tier routers from multiple buildings of a campus, or large enterprise locations. They tend to be optimized for high bandwidth.
When an enterprise is widely distributed with no central location(s), the function of core routing may be subsumed by the WAN service to which the enterprise subscribes, and the distribution routers become the highest tier.

A core router is a router designed to operate in the Internet backbone, or core. To fulfill this role, a router must be able to support multiple telecommunications interfaces of the highest speed in use in the core Internet and must be able to forward IP packets at full speed on all of them. It must also support the routing protocols being used in the core.
Like the term "supercomputer", the term "core router" refers to the largest and most capable routers of the then-current generation. A router that was a core router when introduced will not be a core router ten years later. At the inception of the ARPANET (the Internet's predecessor) in 1969, the fastest links were 56 kbit/s and a given routing node had at most six links. The "core router" was a dedicated minicomputer called an IMP Interface Message Processor.Link speeds increased steadily, requiring progressively more powerful routers until the mid-1990s, when the typical core link speed reached 155 Mbit/s. At that time, several breakthroughs in fiber optic telecommunications (notably DWDM and EDFA technologies) combined to permit a sudden dramatic increase in core link speeds: by 2000, a core link operated at 2.5 Gbit/s and core internet companies were planning for 10 Gbit/s speeds.
The largest provider of core routers in the 1980s and 1990s was Cisco Systems, who provided core routers as part of a broad product line. This was despite the presence of faster and more capable routers from Wellfleet Communications, which existed as an independent company until it merged with SynOptics Communications in 1994, to become Bay Networks. Juniper Networks entered the business in 1996, focusing primarily on core routers. Both companies addressed the need for a radical increase in routing capability that was driven by the increased link speed. In addition, several new companies attempted to develop new core routers in the late 1990s. It was during this period that the term "core router" came into wide use. The required forwarding rate of these routers became so high that it could not be met with a single processor or a single memory, so these systems all employed some form of a distributed architecture based on an internal switching fabric.
The Internet was historically supply-limited, and core Internet providers historically struggled to expand the Internet to meet the demand. During the late 1990s, they expected a radical increase in demand, driven by the Dot-com bubble. By 2001, it became apparent that the sudden expansion in core link capacity had outstripped the actual demand for internet services in the core. The core internet providers were able to defer purchases of new core routers for a time, and most of the new companies went out of business. Cisco and Juniper were able to deliver their newest core router products several years later.

Routers


Routers are networking devices that forward data packets between networks using headers and forwarding tables to determine the best path to forward the packets. Routers work at the network layer of the TCP/IP model or layer 3 of the OSI model. Routers also provide interconnectivity between like and unlike media (RFC 1812). This is accomplished by examining the Header of a data packet, and making a decision on the next hop to which it should be sent (RFC 1812) They use preconfigured static routes, status of their hardware interfaces, and routing protocols to select the best route between any two subnets. A router is connected to at least two networks, commonly two LANs or WANs or a LAN and its ISP's network. Some DSL and cable modems, for home use, have been integrated with routers to allow multiple home computers to access the Internet.
A router (pronounced /rou'tər/) is a computer whose software and hardware are usually tailored to the tasks of routing and forwarding, generally containing a specialized operating system (e.g. Cisco's IOS or Juniper Networks JUNOS and JUNOSe or Extreme Networks XOS), RAM, NVRAM, flash memory, and one or more processors. High-end routers contain many processors and specialized Application-specific integrated circuits (ASIC) and do a great deal of parallel processing. Chassis based systems like the Nortel MERS-8600 or ERS-8600 routing switch, (pictured right) have multiple ASICs on every module and allow for a wide variety of LAN, MAN, METRO, and WAN port technologies or other connections that are customizable. However, with the proper software (such as SmoothWall, XORP or Quagga), even commodity PCs can act as routers.
Routers connect two or more logical subnets, which do not necessarily map one-to-one to the physical interfaces of the router. The term layer 3 switch often is used interchangeably with router, but switch is really a marketing term without a rigorous technical definition. In marketing usage, it is generally optimized for Ethernet LAN interfaces and may not have other physical interface types.
Routers operate in two different planes
Control Plane, in which the router learns the outgoing interface that is most appropriate for forwarding specific packets to specific destinations,
Forwarding Plane, which is responsible for the actual process of sending a packet received on a logical interface to an outbound logical interface.



Network switch




Switches

A switch is a device that performs Linksys 8-port switching. Specifically, it forwards and filters OSI layer 2 datagrams (chunk of data communication) between ports (connected cables) based on the Mac-Addresses in the packets.This is distinct from a hub in that it only forwards the datagrams to the ports involved in the communications rather than all ports connected. Strictly speaking, a switch is not capable of routing traffic based on IP address (layer 3) which is necessary for communicating between network segments or within a large or complex LAN. Some switches are capable of routing based on IP addresses but are still called switches as a marketing term. A switch normally has numerous ports with the intention that most or all of the network be connected directly to a switch, or another switch that is in turn connected to a switch.
"Switches" is a marketing term that encompasses routers and bridges, as well as devices that may distribute traffic on load or by application content (e.g., a Web URL identifier). Switches may operate at one or more OSI layers, including physical, data link, network, or transport (i.e., end-to-end). A device that operates simultaneously at more than one of these layers is called a multilayer switch.
Overemphasizing the ill-defined term "switch" often leads to confusion when first trying to understand networking. Many experienced network designers and operators recommend starting with the logic of devices dealing with only one protocol level, not all of which are covered by OSI. Multilayer device selection is an advanced topic that may lead to selecting particular implementations, but multilayer switching is simply not a real-world design concept.
A network switch is a computer networking device that connects network segments.
Low-end network switches appear nearly identical to network hubs, but a switch contains more "intelligence" (and comes with a correspondingly slightly higher price tag) than a network hub. Network switches are capable of inspecting data packets as they are received, determining the source and destination device of that packet, and forwarding it appropriately. By delivering each message only to the connected device it was intended for, a network switch conserves network bandwidth and offers generally better performance than a hub.
In the past, it was faster to use Layer 2 techniques to switch, when only MAC addresses could be looked up in content addressable memory (CAM). With the advent of ternary CAM (TCAM), it was equally fast to look up an IP address or a MAC address. TCAM is expensive, but very appropriate for enterprise switches that use default routes plus a moderate number of other routes. For routers that need a full Internet routing table, TCAM may not be cost-effective.